Can’t Get Springs On Trampoline? Try These 4 Alternatives

Has this happened to you that you can’t get springs on trampoline? Your trampoline is just not the same since you lost them. You’ve tried finding replacements but to no avail. I get it; it’s frustrating.

It feels like fun on your trampoline when it’s bouncy and lively with springs, but now that they’re gone, it feels like a different piece of equipment. You might think that you need to buy new ones, but there are actually a few alternatives that can give it a similar feel.

Don’t worry; I’ve got you covered! These 4 tool hacks will help get your fun partner back to its bouncy best in no time.

General Instructions If You Can’t Get Springs On Trampoline

If your trampoline uses standard metal springs, then you will need a tool in order to remove or add them. This process is actually quite simple and only requires a few essential tools.

• First, you will need to gather your materials. You will need the tool, a pair of pliers, and a set of replacements (if you are adding them).

• Next, you will need to locate the spring you wish to remove or add. The tool has a forked end that will fit around the coils.

• Position the forked end of the tool around the bottom coil you wish to remove. Next, squeeze the tool handles together so the coils are pinched.

• While squeezing the handles, twist the tool in a counter-clockwise direction. This will loosen it from the frame.

• Once it’s loose, you can remove it by simply pulling it off the frame. To add a new one, simply reverse the process.

• Place the bottom coil of the new spring onto the frame and twist the tool in a clockwise direction to tighten it.

And that’s it!

You also might be interested in: How To Clean Your Trampoline

4 Alternative Ways If You Really Can’t Get Springs On Trampoline

Let’s look at how we might use our supplementary approaches to get the job done.

Bungee Cords

You can use these instead to give your trampoline a good bounce. But, first, you’ll need to purchase some heavy-duty bungee cords and follow the instructions below.

1. Remove the covers.

2. Locate the hole in the middle of each support tube.

3. Cut a length of bungee cord that is twice the length of the support tube.

4. Feed one end of the bungee cord through the hole in the support tube.

5. Tie a knot at the end of the bungee cord to secure it in place.

6. Attach the other end of the bungee cord to the frame.

7. Repeat this process for each of the bungee cords.

8. Replace the covers.

9. Test the bounce.

Rope

This is probably the most common alternative, as it is relatively cheap and easy to find. In addition, the rope can be attached to the frame similarly and provide a similar level of bounce.

Follow these steps to attach a rope to your frame:

1. Measure the length of rope you will need. You will need one length of rope for each spring you are replacing.

2. Cut the rope to the appropriate length.

3. Tie a knot at one end of each length of rope.

4. Attach the other end of the rope to the frame in the exact location of the spring you are replacing.

5. Repeat for each spring you are replacing.

PVC Pipe Support

If you have some PVC pipe lying around, you can use it to create a support system.

1. Cut the pipe into slightly longer sections.

2. Next, take the sections of PVC pipe and insert them into the holes where the springs typically go.

3. Once the PVC pipes are in place, use zip ties to secure them. This will provide extra support and stability to the structure.

Homemade T-Hook

For this project, you will need some solid and thick wire and a pair of pliers.

1. Take the wire and make a small loop at one end, then use the pliers to twist the wire around itself until it is secure.

2. Next, make a small hook on the other end of the wire.

3. Your T-hook is now complete and ready to be used!

4. To use it, simply place the hook over the frame and push it down.

5. The wire will grip the frame and hold it in place, providing extra support.

Bottom Line

I hope these 4 alternatives will help you get your trampoline back to its bouncy best if you can’t get springs on trampoline. With a bit of ingenuity and some creativity, you can keep it fun and functional. So get innovative and enjoy your trampoline!